EMMO GT80 - Handlebar Controls; Throttle Operation; Light Switch

15 | P a g e
Turning Signals
Pushing the switch to
either the left or right
positions will turn on
the respective
front/rear turning
signals. Pushing the
switch in will turn off
your turning signals.
Horn
Pushing this button
sounds the horn.
High/Low Beam
Switch
Pushing the switch up
activates the high
beams for the front
headlights, pushing it
down deactivates the
high beams.
Horn
Pushing this button
sounds the horn.
Throttle
When the throttle is turned backwards
(toward the rider) it makes the e-bike move
forward. (The amount of speed that the rider
gets depends on how far the throttle is
pulled)
Light Switch
This switch controls the amount of lightning on your
bike. When the switch is pushed to the right, no extra
lights are turned on. (Only brake lights work) When
the switch is in the middle, the dashboard light,
running light (front), and tail light turns on. When the
switch is pushed to the left, the head-lights, tail-lights,
and dashboard light are turned on