14 | Page
Note: If the bike is turned on using the
remote start, it can only be turned off using
the ‘unlock’ button on the remote.
This button arms the bike. When the bike is
armed, any physical movement or vibrations to
the bike will cause the alarm to activate. If the
back wheel is moved when the bike is locked,
the back wheel will lock up and the alarm will
sound loudly.
This button unlocks the bike. It cancels all the
functions of the ‘lock’ button. (Alarm sounding,
back wheel lock) It also turns the bike off when
the remote start is activated.
When this button is clicked, the bell sounds.
(Similar sound to the alarm) This button is useful
for locating your bike.
This button turns on your bike, without the use
of the key, when it is clicked twice in succession.
This performs the same actions as manually
turning the key to the right in the ignition to start
the bike. (All the functions on the handlebar can
be used also this does not open the storage under
To Next Page
Loading...
