12 / 18
Remote Control
The EMMO T360 comes with a remote control that allows you to arm and disarm the alarm
system.
Lock: This button arms the bike. When the bike is armed, any physical movement
or vibrations to the bike will cause the alarm to activate. If the back wheel is
moved when the bike is locked, the back wheel will lock up and the alarm will
sound loudly.
Unlock: This button unlocks the bike. It cancels all the functions of the ‘lock’ button. (Alarm
sounding, back wheel lock) It also turns the bike off when the remote start is activated.
Remote Start: This button turns on your bike, without the use of the key, when it is clicked twice
in succession. This performs the same actions as manually turning the key to the right in the
ignition to start the bike. (All the functions on the handlebar can be used also this does not open
the storage under the seat).
Bell: When this button is clicked, the bell sounds. (Similar sound to the alarm) This button is
useful for locating your bike.
To Next Page
Loading...
