14 | Page
Note: If the bike is turned on using the
remote start, it can only be turned off using
the ‘unlock’ button on the remote.
This button arms the bike. Any physical
movement or vibrations to the bike will cause
the alarm to activate. If the back wheel is moved
when the bike is locked, the back wheel will lock
up and the alarm will sound loudly.
When this button is clicked, the bell sounds.
(Similar sound to the alarm) This button is useful
for locating your bike.
This button turns on your bike, without the use
of the key, when it is clicked twice in succession.
This performs the same actions as manually
turning the key to the right in the ignition to start
the bike. This function cannot be used to
substitute the key for any of the other locks on
This button unlocks the bike. It cancels all the
functions of the ‘lock’ button. (Alarm sounding,
back wheel lock) It also turns the bike off when
the remote start is activated.
To Next Page
Loading...
