eMoMo 39 - Frequently Asked Questions

11
The Unit doesn't
respond
Please disconnect the power and try again.
iPod/iPhone is not docked correctly.
I receive a warning
message
This accessory is not made to work with iPhone displays on your iPhone.
Please make sure if your iPod/iPhone is Apple's original.And please
makesure the iPod/iPhone is connected properly or try again.
The buttons can not
work
Please don't press it too hard. If the button is stuck, this control unit be
to be replaced.
FREQUENTLYASKED QUESTIONS
Problem
Possible cause and correction or maintenance
When on iPhone mode,
iPod/iPhone can not
play automatically.
The iPod/iPhone is lacking of power. Please charge it for few minutes.
The volume switch is on minimum, the unit isn't set to the correct function.
Or the speaker cablesare not connected well with mainmachine.If the
speaker units are bad, please contact your seller for replacing the speaker
units.
No sound at all
AC adaptor isn't plugged into a working socket or not plugged into the
power supply jack properly at the back of the unit. If the unit still can not
work, please find the warranty information on page12, contact them for
replacement.
The unit does not
turn on