Emos E0211 User Manual

3
GB
Projection Wireless Weather Station
The E0211 weather station is composed of two basic parts – a weather forecast unit and a wireless heat sensor. The transmission
from the sensor is wireless at a frequency of 433 MHz – no installation of electrical cables is required. The weather station can
receive and display data from up to three wireless heat sensors.
Description of Button Functions of the Weather Station – See Figure
I – Down IV – alarm setting
II – Up V – temperature alert setting
III – MODE VI – snooze/display backlight
Description of Display Functions on the Weather Station Screen – See Figure
1 – time; 2 – alarm clock icon; 3 – weather forecast icon; 4 – pressure; 5 – pressure trend; 6 – indoor temperature and humidity;
7 – day of the week; 8 – outdoor temperature and humidity; 9 – sensor channel number (CH); 10 – icon of communication with
sensor; 11 – battery cover
Sensor description
1 – LCD display
2 – Opening for hanging
3 – Battery cover
Product specications
1 – projection of time onto the wall; 2 – calendar; 3 – double alarm with snooze option; 4 – weather forecast; 5 – indoor temperature
and humidity; 6 – outdoor temperature and humidity; 7 – recording max./min. indoor and outdoor temperature and humidity
values; 8 – temperature alert; 9 – pressure level trend indicator; 10 – 7 languages for days of the week; 11 – blue display backlight
radio controlled clock (DCF)
indoor temperature: 0°C to +50°C; resolution 0.1°C
measurement accuracy: ±1°C
outdoor temperature: -20°C to +60°C; resolution 0.1°C
measurement accuracy: ±1.5°C (-20°C to 0°C), ±1°C (0°C to +60°C)
indoor and outdoor humidity: 20 % to 90 %, resolution 1 %
measurement accuracy: ±5 % to 8 %
bar. pressure measurement range: 850 to 1 050 hPa/inHg
wireless sensor: signal transmission frequency 433 MHz
maximum number of sensors: 3
radio signal range: max. 30 metres (in open areas)
outdoor temperature reading cycle: every 43–47 seconds
power
main unit: 3× 1.5 V batteries type AAA;
remote sensor unit: 2× 1.5 V batteries type AAA
SETTING UP THE DEVICE
Installation of Batteries
Wireless heat sensor
1. Open the rear battery cover.
2. Select signal transmission channel number and select measurement scale °C/°F.
3. Insert 2 batteries (type AAA 1.5 V) with the correct polarity.
4. Replace the battery cover.
Station
1. Open the rear battery cover.
2. Insert 3 batteries (type AAA 1.5 V) with the correct polarity.
3. Replace the battery cover.
Notes and Warnings:
Insert batteries into the main unit rst, then into the other sensors. Use alkaline batteries only, not rechargeable ones. The
station can measure up to 3 outside temperatures via 3 sensors. The pack includes only one sensor. Place the wireless heat
sensor 20–30 metres away from the station. The transmission range is inuenced by the construction material in the way of the
transmission, as well as the mutual position of the main unit and the wireless sensor. Do not place the sensor on metal objects
or in their vicinity. For best results, test various settings on the device. Though the sensors are resistant to weather conditions,
they should be placed away from direct sunlight, rain or snow. Ideal placement is on the north side of the house.
Time Settings
DCF77 radio signal reception
The clock receives DCF77 radio signal in hourly intervals throughout the day The radio signal reception takes 3 to 5 minutes.
During DCF signal reception, the icon will ash. If the icon is not displayed, the DCF signal is not being received. After proper

Emos E0211 Specifications

General

Brand	Emos
Model	E0211
Category	Weather Station
Language	English