Emos P5630S - Page 18

18
b. Select the ECO Mode settings option by repeatedly pressing the
button.
ECO Mode settings are selected when the
icon starts ashing. Press
to conrm the selection of the setting.
c. Once you are inside ECO Mode settings, use the rotary wheel on the thermo-
static head to set the temperature and conrm by pressing the
button.
d. Once you have conrmed your chosen ECO Mode temperature, the thermo-
static head navigates back to the main screen.
5. Setting Comfort Mode
a. To set up Comfort Mode, hold the
button for 5 seconds. This opens the
thermostatic head‘s settings.
b. Select the Comfort Mode settings option by repeatedly pressing the
button. Comfort Mode settings are selected when the
icon starts ashing.
Press
to conrm the selection of the setting.
c. Once you are inside Comfort Mode settings, use the rotary wheel on the
thermostatic head to set the temperature and conrm by pressing the
button.
d. Once you have conrmed your chosen Comfort Mode temperature, the
thermostatic head navigates back to the main screen.
6. Setting Temperature Calibration
a. To set Temperature Calibration, hold the
button for 5 seconds. This
opens the thermostatic head‘s settings.
b. To select Temperature Calibration, repeatedly press the
button. Temper-
ature Calibration settings are selected when the
icon starts ashing.
Press
to conrm the selection of the setting.
c. Conrming the previous step takes you to the advanced settings of the
thermostatic head. There, Temperature Calibration is marked by the number
1 in the top right corner of the screen. Temperature calibration can be set to
between -9 °C and 9 °C. The value shown on the screen is based on current
temperature in the room.