Emos P5630S - Upkeep and Maintenance

24
d. Once the number 9 appears in the top right of the screen, the screen also
shows the number 88. Turning the rotary wheel of the thermostatic head
changes the number to 00. Conrming with the
button resets the head.
All icons on the screen will light up for 2 seconds.
e. To go back to settings of the thermostatic head, press . To return to the
main screen, press
.
Upkeep and Maintenance
The product is designed to serve reliably for many years if used properly. Here
are some tips for proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold, humidity and
sudden changes in temperature. This would reduce measuring accuracy.
• Do not place the product in locations prone to vibration and shocks – may
cause damage.
• Do not subject the product to excessive force, impacts, dust, high temper-
atures or humidity – doing so may cause malfunction, shorten battery life,
damage the batteries or deform the plastic parts.
• Do not expose the product to rain or high humidity, dropping or splashing
water.
• Do not place any open ame sources on the product, e.g. a lit candle, etc.
• Do not put the product in places with inadequate air ow.
• Do not insert any objects in the product‘s vents.
• Do not tamper with the internal electric circuits of the product – doing so may
damage the product and will automatically void the warranty. The product
should only be repaired by a qualied professional.
• To clean the product, use a slightly moistened soft cloth. Do not use solvents
or cleaning agents – they could scratch the plastic parts and cause corrosion
of the electric circuits.
• Do not immerse the product in water or other liquids.
• In the event of damage or defect of the product, do not make any repairs by
yourself. Have it repaired in the shop where you bought it.