Emos P5630S - Page 23

23
13. Valve Control
a. To set Valve Control, hold the
button for 5 seconds. This opens the
thermostatic head‘s settings.
b. To select the Valve Control settings option, repeatedly press the button.
The Valve Control function is selected when the
icon starts ashing.
Press
to conrm the selection of the setting.
c. Conrming the previous step takes you to the advanced settings of the
thermostatic head. To navigate in the advanced settings, press
.
There, Valve Control settings are marked by the number 8 in the top right
corner of the screen.
d. Once the number 8 appears in the top right of the screen, you can use the
rotary wheel on the thermostatic head to set the type of valve control. Value
= 0: control in accordance with the modes you have set; value = 1 automatic
control based on current temperature.
e. To conrm your Valve Control settings, press the
button. Conrming
redirects you to the next advanced setting (Reset Thermostatic Head, marked
by the number 9 in the top right corner of the screen).
f. To go back to settings of the thermostatic head, press
. To return to the
main screen, press
.
14. Reset the Thermostatic Head
a. To Reset the Thermostatic Head, hold the
button for 5 seconds. This
opens the thermostatic head‘s settings.
b. To select the Reset the Thermostatic Head settings option, repeatedly
press the button. The Reset the Thermostatic Head option is selected
when the
icon starts ashing. Press to conrm the selection
of the setting.
c. Conrming the previous step takes you to the advanced settings of the
thermostatic head. To navigate in the advanced settings, press
. There,
the Reset the Thermostatic Head option is marked by the number 9 in the
top right corner of the screen.