Emos P5801 - Page 8

8
9
Hold the „SET/OK“ button for 3 seconds. „DUAL TARIFF“ will start blinking. Again
press „SET/OK“ – use the „HISTORY“ button to change the number, then press
„ENERGY/+“ or „COST/-“ to set arange between 0.00 EUR/kWh and 9 999 EUR/kWh;
you can move between numbers using the „HISTORY“ button. Finally, press „SET/OK“
to conrm the set values.
2.1 Setting power current tari 1 time
After setting the tari values, the screen will show „TIME START“
Press the „HISTORY“ button and select which value you want to change. By pressing
„ENERGY/+“ or „COST/-“, you can increase or decrease the values. When you are
done, press „SET/OK“.
2.2 Setting power current tari 2
To set up power current tari 2, proceed as described in points 2 and 2.1
Power consumption metre
GB