Emos SELECT ESW9010 Quick Guide

4
Upload
Browse
Firmware version: 1.00
-560~ 560hpa / -16.54 ~ 16.54inHg / -420 ~ 420mmHg
Setting Range:
Temperature
o
C
Outdoor
Indoor
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
Humidity %
Relative Pressure Offset:
Absolute Pressure Offset:
hpa
Range: -20 ~ 20
(Default: 0.0)
Current offset: 10Current offset: -9
Current offset: -5Current offset: 2
Current offset: -2Current offset: 3
Current offset: -2Current offset: 1.2
Current offset: -5Current offset: -0.2
Current offset: -3Current offset: -20.1
Current offset: -10Current offset: 11.5
Current offset: -3
Current offset: -3
(Default: 0)
Current offset: 10
(Default: 0)
Current offset: 0.2
Current offset: -5Current offset: 1
Pressure
Range: -20.0 ~ 20.0
o
C
-36.0 ~ 36.0
o
F (Default: 0.0)
*UV gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.1
*Light gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.1
* Depends on the model
*Wind speed gain:
*Wind direction:
*Rain gain:
Range: 0.5 ~ 1.5(Default: 1.00)
Range: -10 ~ 10(Default: 0
o
)
Range: 0.5 ~ 1.5(Default: 1.00)
Current gain: 0.85
Current offset: 2
o
Current gain: 0.75
SETUP ADVANCED
SETTINGS
ADVANCED SETTINGS / OFFSET (OPTIONAL)
In case you have multiple weather stations, the values of the ESW9010 can be corrected to
match those of your other stations. Under “Advanced” you can offset the measurements of
the weather station.
Offset the Temperatures
and humidity with -20 up
to +20 C/F/%
Offset the pressure by
-560 - +560 hPa or
-16.54 inHg - +16.54nHg
Offset the other
parameters with factor
-05 - +1.05 or -10 - +10
degrees for the wind
direction.

Emos SELECT ESW9010 Specifications

General

Brand	Emos
Model	SELECT ESW9010
Category	Weather Station
Language	English