To begin using the eMotion Caddy simply press the e logo on the handle and the
GREEN light will light up and the caddy is ready to use. (Fig. 12)
THAT’S IT!
SECURITY KEY
Each eMotion Caddy comes with a Security Key (Fig. 13)
to prevent usage by unauthorized people. The Security
Key is similar to a car door key, each one is unique
and cannot be used in another caddy.
To lock the eMotion caddy, simply plug the security key into the plug in the
underside of the handle (Fig. 13) and remove it, the light will alternate RED and
GREEN, this means the caddy is in the lock condition.
To unlock the caddy, simply push the e button on the handle and the lights will
flash GREEN and RED, then plug the security key in the plug on the underside of
the handle (Fig, 13), the GREEN light will stay on and the caddy is unlocked.
<CAUTION> : IT IS NOT MECESSARY TO LEAVE THE SECURITY KEY PLUGGED IN AND
IT COULD BE LOST IF IT IS LEFT IN.
e 3 CADDY
For the e3 model, there are 2 features that are not on the e2 model.
e3 Features eMotion Caddy’s Patented Pace Technology
>>> Simply place your hand on the handle, it is not necessary to grip the handle.
>>> The eMotion Caddy has a very sophisticated sensor in the grip and will move
forward at your pace.
>>> After a few steps, the e3 caddy will perfectly match
your speed and you can release the handle. (Fig. 14)
>>> The caddy will maintain this pace until you touch
the handle to speed it up or slow it down or stop it.
<CAUTION> : YOU MUST KEEP TRACK OF THE CADDY WHEN IT IS IN THE MODE
BECAUSE IT CAN MOVE ON ITS OWN AND POTENTIALLY CRASH.
>>> Another feature for the e3 model is the automatic forward setting.
>>> This setting can be used to send the caddy ahead to the next tee or away from
the green.
<CAUTION> : MAKE SURE THE DIRECTION THAT YOU ARE SENDING THE CADDY IS
CLEAR. THE CADDY WILL BE MOVING ON ITS OWN AND CAN
POTENTIALLY CRASH.
OPTIONS
1. Umbrella Holder : This golf cart umbrella holder clamps to the cart to hold an
umbrella, It fits most golf carts and its holder’s clamps easily attach
to the cart frame tube and require two screws to be tightened.
(Opt. 1)
2. Cub Holder : Fully adjustable. Just twist the bottom and it increases in length
and automatically adjusts its inner diameter. (Opt. 2)