4
Product Elements
Bluetooth Adaptor Installation Instructions
IMPORTANT: TO INSTALL THIS BLUETOOTH ADAPTOR, PLEASE SEEK ASSISTANCE FROM A QUALIFIED
ENGINEER. THESE INSTRUCTIONS ARE FOR GENERAL GUIDANCE ONLY AS THE INSTALLATION PROCEDURE
MAY VARY DEPENDING ON CARAVAN TYPE.
WARNING: WORKING UNDER A VEHICLE WITHOUT THE APPROPRIATE SUPPORT IS EXTREMELY DANGEROUS.
Prior to installation, you need to ensure that the control box of your EMOVE has
been installed by a qualified engineer.
1. First, park up your caravan that has been fitted with your EMOVER on a
solid, level surface. Then use a lifting ramp to safely access the installed
control box.
2. Unpack all the components and check for the presence of all parts
(product elements).
3. With the supplied screws, the
Bluetooth adaptor should be
mounted on the outside of the
caravan to ensure your smartphone
can receive a Bluetooth signal right
around the caravan. Figure 1 shows
how the adaptor should be mounted
using the supplied screws.
Figure 1
To Next Page
Loading...
