To Next PageTo Next PageWhy is there no spark when lighting the gas on my Empava Cooktop?
If your Empava Cooktop isn't sparking when you try to light the gas, ensure the unit is properly plugged in and that the electrical supply is switched on. Also, verify that the RCCB hasn't tripped, and the mains fuse hasn't blown. Finally, double-check that the burner cap and crown have been correctly replaced, especially after cleaning.
How to fix an Empava EMPV-12GC29 gas ring that burns unevenly?
If the gas ring on your Empava Cooktop burns unevenly, make sure that the main jet is not blocked and the burner crown is clear of any food particles. Also, check that the burner cap and crown have been correctly replaced, for example, after cleaning.
Identifies the appliance type.
Specifies the product model number for identification.
Explains the procedure for igniting the gas burners.
Covers cleaning and maintenance of control panel, burners, ignition electrode, and thermocouple.
Covers overall dimensions, cut-out dimensions, technical data, and burner configuration.
Specifies permissible and restricted locations for cooktop installation.
Details the steps for correctly installing the pressure regulator.
Explains how to connect the gas supply and check for leaks.
Provides the required dimensions for countertop cutouts.
Outlines essential safety procedures for grounding the appliance.
Illustrates the electrical connections and wiring for the appliance.
Provides a duplicate section of the warranty card for user records.
General
