Using Boost function- EMPV-36EC01 / EMPV-30EC02
Activate the boost function
Touching the heating zone ON/OFF control and touching “ +” until power level
indication shows “P”.
Cancel Boost function
Touching the “—” to cancel the Boost function, and select the level you want to
set.
• Boost function can only last for 5 minutes, after that the zone will go to level 9
automatically.
Using your Cooktop - EMPV-24EC03
To start cooking
•
After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the cooktop has entered the state of standby
mode.
1.Touch the ON/OFF switch. all the indicators
show “– “
2.Place a suitable pan on the cooking zone that you
wish to use. Make sure the bottom of the pan and
the surface of the cooking zone is clean and dry.
3.Touching the heating zone selection control, and
an indicator next to the key will flash.
4.Select a heat setting by touching the “-” “+” control.
•
If you don’t choose a heat setting within 1 minute, the induction cooktop
will automatically switch off. You will need to start again at step 1.
To Next Page
Loading...
