Need help?Do you have a question about the EMPHASER EA2220 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Amplifier Class | AB |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >90 dB |
| Lowpass Filter | 50Hz - 250Hz |
| Highpass Filter | 50Hz - 250Hz |
| Bass Boost | 0 - 12 dB |
| Operating Voltage | 10.5 - 16V |
Details all controls and indicators on the front panel, including LEDs, gain, and crossover adjustments.
Details all power input and speaker output terminals on the rear panel for EA2160/EA2220 models.
Details all controls and indicators on the front panel for the EA480 model.
Details power input and speaker output terminals on the rear panel for the EA480.
Details RCA inputs, gain controls, and crossover settings for channels 1-4 on the EA450-300.
Details channel 5 controls, remote input, and protection LED on the EA450-300 front panel.
Details speaker outputs and power input terminals on the EA450-300 rear panel.
Instructions for connecting the main power cables, including fuse placement and ground connection.
To Next Page
