DIGITAL FABRIC STEAM PRESS PRODUCT
INFORMATION
-The Handle is used to safely lift up and lower the Pressing Plate, and to carry the
unit.
- The Steam Burst Buttons (2) are located on either side of the handle, and produce a
powerful burst of steam when pressed.
-The Water Reservoir Cap (3a) covers the Water Reservoir fill hole and must be
removed in order to fill the Water Reservoir with distilled water.
-The Water Reservoir (3b) is tank in which distilled water is stored for use by the unit.
There must be water in the Water Reservoir in order for the units steam burst
function to work correctly.
-The Ironing Board (4) is padded surface onto which fabric is placed during pressing.
The fabric cover is removable and can be washed.
-The Pressing Plate (5) is the temperature-controlled teflon surface that heats and
presses fabric.
-The Pressing Plate Cover (6) is the durable cover that protects the Pressing Plate.
-The On/Off Switch (7) activates and deactivates the unit.
-The Locking Knob (8) locks the Pressing Plate and Ironing Board together. This
allows for carrying and storage of the unit.
-The Power Indicator Light (Red) (9) illuminates when the On/Off Switch is set to the
“On ” position, providing you with a clear visual indication that the units is powered
on..
-The Pressing Indicator Light (Green) (10) illuminates while the unit is heating to the
selected temperature .When deactivated, this indicates that you are ready to press.
-The Steam Burst Ready Indicator Light (Yellow) (11) illuminates once the unit is
ready to produce bursts of steam, providing you with a clear visual indication that
you can begin using the Steam Burst Buttons.
-The Temperature Control Buttons (12) are pushed to select a desired temperature.
Press the right arrow button to cycle right through the list of fabric choices above
the buttons, and press the left arrow button to cycle left through the list of fabric
choices above the buttons..
-The Cord Storage Compartment (13) provides a convenient and easily accessible
place to store the power cord.
-The Measuring cup (14) is designed to assist you in easily filling the Water Reservoir
with distilled water.
-The Spray Bottle (15) allows you to moisten fabric before pressing, which helps to
make the pressing process easier and more effective in certain instances.
-The Pressing Cushion (16) is a fabric-covered pad used for pressing gathered or
contoured areas such as sleeves, darts, or yokes.
To Next Page
Loading...