Step 7(f): No empty breaker
and one Main CT
Common in European 1-phase homes
Uncommon in N. American homes
Secure the White (N)
, Red (L2), and Blue
(L3) wires from the wire harness to the
neutral block. Turn off a 15A MCB and
disconnect its wire. Connect that wire to the
Black (L1) wire from the harness and a
splicing wire with the wire nut. Then secure
the splicing Wire to the MCB.
Need help?
emporiaenergy.com/support
support@emporiaenergy.com
1-844-EMPORIA (367-6742)
A larger amp breaker may be
used if the gauge of the splicing
wire matches the existing gauge
wire from the breaker meeting the
national and regional codes
To Next Page
Loading...
