EMPORIA VUE 3 - Step 2: Prepare the Electrical Panel

Step 2: Turn off the main
breaker and remove the cover
First, turn service disconnects and/or main
breakers feeding the panel into the OFF
position. Note that these may be located
outside of the panel in which you're
installing the Vue. Next, remove any screws
holding the cover to the panel and remove
the cover to access the circuit breakers and
the energized service mains!
Need help?
emporiaenergy.com/support
support@emporiaenergy.com
1-844-EMPORIA (367-6742)



DANGER: The service
mains are energized!
Service disconnect may
be located outside of
the panel