EMPORIA Vue Expansion Module User Manual

Step 4: Connect the Module to the Vue
Use the connection cable to connect the Expansion Module to the Vue
Energy Monitor. Firmly plug the 3.5mm cable plugs into the green ports
on right sides of both units. Ensure this cable is fully inserted into both
ports. When connected, a green light will blink through the hole in the
front of the unit. Also ensure previous connections aren’t disturbed.
Ensure
there’s
no gap
Blinking
Green
Light

EMPORIA Vue Expansion Module Specifications

General

Brand	EMPORIA
Model	Vue Expansion Module
Category	Control Unit
Language	English