button to brew until no descaler is left.
8. Brew with tap water in the MAX level, repeat steps 4-6 for 3 times, then brew until no water is left in
water tank.
TROUBLE SHOOTING
Symptom Cause Corrections
The metal parts in the tank
have rust.
Descaler is not recommended type. It
may corrode the metal parts in the
tank.
Use the descaler
recommended by
manufacturer.
Water leaks from the bottom
of coffee maker.
There is much water in the dri
tra
. Please clean the dri
tra
.
The coffee maker is malfunction. Please contact with the
authorized service facility for
repairing.
Water leaks out of outer side of
filter.
There is some coffee powder on
filter edge.
Get rid of them.
Acid (vinegar) taste exists in
Espresso coffee.
No clean correctly after
cleaning mineral deposits.
Clean coffee maker per the
content in “before the first use”
for several times.
Coffee powder is stored in a hot,
wet place for a long time. The
coffee powder turns bad.
Please use fresh coffee powder,
or store unused coffee powder in
a cool, dry place. After ope
ning a
package of coffee powder, reseal
it tightly and store it in a
refrigerator to maintain its
freshness.
Coffee maker cannot work any
more.
Power outlet is not plugged
well.
Plug the power cord into a wall
outlet correctly, if the appliance
still does not work, please
contact with the authorized
service facility for repairing.
Steam cannot froth. The steam indicator is not
illuminated.
Only after the steam indicator is
illuminated, the steam can be
used to froth.
The container is too big or the
shape not fits.
Use high and narrow container.
You have used skimme
d milk Use whole milk or half-skimmed
milk
Do not take apart the appliance by yourself if the cause of failure is not found, you had better
contact the qualified servicing center.
To Next Page
Loading...