Charge for 10 hours before using for the
first time
Please charge the Powerbox for at least 10
hours before using it for the first time.
Only use the power supply unit supplied to
charge the Powerbox.
This is how you charge the battery in the Powerbox:
1. Ensure that the Powerbox is not connected to a Motion-
Skin.
2. Connect the Powerbox to a socket using the power sup-
ply unit supplied.
The following status is displayed when the Powerbox is turned on or
during charging.
Red light flashes quickly Low battery
Red light flashes: Battery charging
Red light is on: Battery is charged
Rechargeable batteries have a limited number of charging cycles and
must be replaced over time. The charging cycle and battery charging
time depend on the use of the device and the application environment.
To Next Page
Loading...