EMtronics EMRCBL1 - Preparing for Use; Operational Preparation Caution

To Next Page

To Previous Page

Preparing for Use

Please read these instructions carefully before using the appliance.

CAUTIONS TO NOTE BEFORE USING RICE COOKER:

Do not place or rest anything on top of the appliance or cover the air vent. This disrupts

the airﬂow and will aect the overall cooking result.

Keep all body parts away from the air vent to avoid being burnt by the emitted hot steam.

1. Place the appliance on a heat resistant stable, horizontal and level surface.

2. Only use this product with the correct AC voltage outlet. (For correct rated voltage,

see box and label featured at the bottom of rice cooker).

3. Press the power switch to the setting “O (Power O)” before plugging the

appliance into the mains. Do not turn on the appliance if the rice bowl is not in

the cooker, or when cooker is not being used. DISCLAIMER: The “KEEP WARM”

function operates whenever the cord is plugged in and the power switch is set to

“I (Power On)”.

4. Plug in the power cord. Please do not plug in the appliance until you are ready to

cook, otherwise the rice may be spoiled. DISCLAIMER: If the rice bowl is not in the

cooker, the cooking process will not begin.

5. If the switch button is dicult to press to your desired setting, do not try to force

the switch to move. The switch usually becomes sti when the rice bowl is not

securely positioned inside the Rice Cooker.

6. Place the lid, making sure it is securely ﬁtted to your rice bowl whilst in operation;

keep the lid in place after serving to prevent your rice from drying out or

discolouring.

7. Keep the bottom of the rice bowl and the surface of the heater plate free of loose

grains of rice, residue and other potential items as this will encourage operating

malfunctions and decrease the appliances longevity.

CAUTION

BEFORE USING THE APPLIANCE, CLEAN THE BOTTOM OF THE RICE BOWL AND THE

SURFACE OF THE HEATER PLATE, THEN TURN THE RICE BOWL CLOCKWISE AND ANTI-

CLOCKWISE SO THAT IT SITS PROPERLY ONTO THE HEATER PLATE INSIDE THE RICE COOKER.

OTHERWISE, THE RICE COOKER WILL NOT FUNCTION CORRECTLY AND POTENTIALLY BECOME

DAMAGED.