emz smart Sol - Operation Mode: Efficiency Functions; Disable Recharge Setup

73
Malfunction
If the cause of the malfunction
has not yet been determined,
troubleshooting can be continued.
Continue with ›No‹.
Select all the sources of malfunctions
listed, and conrm via ›OK‹.
Repair information appears.
Perform the appropriate repair work.
Exit the ›Service Wizard‹
by pressing ›Exit‹.
1.10 Service Wizard
04. 07. 2012 10:33
Please replace
the cable.
Exit
1.10 Service Wizard
04. 07. 2012 10:33
Could you detect
a short-circuit /
cable break?
YesNo
1.10 Service Wizard
04. 07. 2012 10:34
Possible reasons:
Cable/connection
Sensor
Exit