Need help?Do you have a question about the emz smart Sol and is the answer not in the manual?
General| Brand | emz |
|---|---|
| Model | smart Sol |
| Category | Temperature Controller |
| Language | English |
Mortal danger for assets, life and limb; assembly, connection, repair, disassembly must be by qualified specialists.
Immediate danger for assets, life and limb.
Controller for solar thermal plants; installation by specialists; housing must be closed and undamaged.
Details mounting, housing, protection, dimensions, weight, storage temp, handling, display, power reserve.
Specifies terminals, voltage, frequency, consumption, fuse, and pulse voltage.
Mortal danger due to electrocution; disconnect power supply before opening.
Mortal danger due to electrocution; disconnect power supply before opening terminal cover.
Ensures minimum heating to reduce legionella by starting a reheat cycle.
Activates reheating when temperature falls below set value, using boiler or existing heat.
Controller must be assembled, connected, and cover closed before commissioning.
Scroll through schemes, select illustrated system, then set relevant parameters.
Allocate outputs/inputs first, then select corresponding schemes.
Assign output interfaces (RO1, RO2, REL) to selected functions like Solar pump.
Select and assign input interfaces (TS1-TS4) to functions like Collector 1.
Configure volume flow measurement using an impeller sensor, specify unit and factor.
Configure up to two heat counters, select evaluation period (Week, Month, Year).
Select output, activate 'On', check if pump/valve activates.
Configure parameters like tank recooling and soft charge for periods when the plant is not used.
Set tank temperature limits (T limit 1/2) to control pump operation and prevent overheating.
Configure antifreeze protection for the plant, including type and temperature.
Guides through possible causes of malfunctions based on detected symptoms.
Error message for sensor breakage on TS1; troubleshooting options available.
Mortal danger due to electrocution and risk of fire; use correct fuse type.
Settings require detailed knowledge; modifications by non-experts can cause damage.
Enter access code '365' via the Login menu to enter professional mode.
Activate individual outputs for testing purposes in manual mode.
Mortal danger due to electrocution; disconnect power supply before opening terminal cover.
To Next Page
