75
Malfunction
... and the appropriate logical conclusion
is made, the repair work displayed.
After elimination of the malfunction,
the plant screen without the
›Attention‹ symbol appears again on
the display, automatic mode is continued.
After description of the troubleshooting
measure, the result determined by you
is interrogated...
1.10 Service Wizard
04. 07. 2012 10:34
Is your measured
value within
this range?
Yes
No
1.10 Service Wizard
04. 07. 2012 10:34
Sensor is faulty and
must be replaced.
Exit
System 1
04. 07. 2012 10:38
To Next Page
