Enclustra Mercury XU5 - Page 4

1
2
Set up the Hardware
Mount the module
and the heatsink
to the
base board
Connect the Base Board
1. Insert module rst. 2. Follow the steps in the order
indicated in the image below. 3. Insert power last.
8 Plug-in the power supply 7 Connect ethernet with PC (optional) 6 Connect webcam 4 Connect PC with USB
3 Set/check
Dip-Switches
1 Set/check
jumpers
2 SD Card –
already
inserted
5 Connect display
ON
1 2 3 4
VSEL