Enclustra Mercury+ XU6 User Manual

Mercury+ XU6 SoC Module
User Manual
Purpose
The purpose of this document is to present the characteristics of Mercury+ XU6 SoC module to the user,
and to provide the user with a comprehensive guide to understanding and using the Mercury+ XU6 SoC
module.
Summary
This document first gives an overview of the Mercury+ XU6 SoC module followed by a detailed description
of its features and configuration options. In addition, references to other useful documents are included.
Product Information Code Name
Product ME-XU6 Mercury+ XU6 SoC Module
Document Information Reference Version Date
Reference / Version / Date D-0000-464-001 02 21.07.2021
Approval Information Name Position Date
Written by RLOC Design Engineer 23.11.2020
Verified by DIUN, ARUD Design Expert 04.02.2021
Approved by DIUN Manager, BU SP 21.07.2021
Enclustra GmbH – Räffelstrasse 28 – CH-8045 Zürich – Switzerland
Phone +41 43 343 39 43 – www.enclustra.com

Enclustra Mercury+ XU6 Specifications

General

FPGA	Xilinx Zynq UltraScale+ MPSoC
Ethernet	2x Gigabit Ethernet
Memory	4GB DDR4
Storage	8GB eMMC
Flash	128 MB QSPI Flash
USB	USB 2.0
PCIe	PCIe Gen2 x4
Operating Temperature	-40°C to +85°C
Power Supply	5V DC
Dimensions	74 x 54 mm
Connectivity	USB, PCIe

Summary

Overview

Features

Detailed list of hardware features, including processor, memory, and I/O capabilities.

Accessories

Information on optional accessories like base boards and heatsinks for the module.

Module Description

Block Diagram

Visual representation of the module's internal architecture and component connections.

Module Configuration and Product Models

Explains how product models are defined by SoC type, memory, and speed grade.

Module Footprint and Mechanical Data

Dimensions, mounting, and physical characteristics for base board integration.

Module Connector

Details of the Hirose FX10 connectors used for base board interface.

User I/O and Signal Terminations

Guide to user I/O pins, banks, and signal termination strategies.

Multi-Gigabit Transceiver (MGT)

Information on high-speed transceivers (GTH and GTR) for serial communication.

Power

Detailed overview of power supply generation, inputs, outputs, and monitoring on the module.

DDR4 SDRAM

Specifications and configuration details for the DDR4 SDRAM memory.

Storage Interfaces (QSPI Flash, eMMC Flash, SD Card)

Details on QSPI flash, eMMC flash, and SD card for boot and data storage.

Communication Interfaces (Ethernet, USB, DisplayPort)

Information on Ethernet, USB, and DisplayPort for connectivity.

Device Configuration

Configuration Signals and Boot Mode

Key pins for MPSoC configuration, boot mode selection, and reset.

Programming (JTAG, Flash)

Methods for programming the module via JTAG and flash interfaces.

I2C Communication

I2C Overview and Address Map

I2C bus connectivity, signal details, and device addresses.

Secure EEPROM

Details on the secure EEPROM for storing module serial number and MAC address.

Operating Conditions

Absolute Maximum Ratings

Electrical and thermal limits for safe operation of the module.

Recommended Operating Conditions

Optimal voltage and temperature ranges for reliable module operation.

Ordering and Support

Ordering and Support

Information on purchasing and obtaining technical assistance for the module.