5
3. Do not overreach when operang the tool. Proper foong and balance
enables br control in unexpected situaons.
4. Support the workpiece or clamp it to a stable plaorm. Holding the
workpiece by hand or against your body may lead to personal injury.
5. Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
6. Give your work undivided aenon. Do not engage in convers
aons
or other acvies while operang.
7. Do not stand on the tool.
8. Obtain advice from supervisors, instructors or other qualied persons
before operang if you are not thoroughly familiar with the tool.
9. Stand to one side when turning the tool on. This will ensure your
safety from loose fragments or parts.
10. Never perform layout, assembly, set up or other work on the tool’s
work bench when the tool is running.
WARNING! DO NOT let comfort or familiarity with
product (gained from repeated use) replace strict
adherence to the tool safety rules. If you use this
tool unsafely or incorrectly, you can suffer serious
personal injury.
1. Use the correct tool for the job. This tool was designed for a specic
funcon. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3. Examine the
tool thoroughly before use. This includes inspecon of
the machine and the safety guards, the alignment and operaon of all
moving parts, the tool’s mounng and other breakage or condion
that may aect its operaon.
4. Keep the safety guards and shields in place at all mes and properly
adjusted and funconing when the machine is in use.
4.1 Ensure the spark shields are no further than 1/8 in. from the
grinding wheel and adjus
t as the wheel wears down.
To Next Page
Loading...