Need help?Do you have a question about the Encore 61K650P and is the answer not in the manual?
General| Brand | Encore |
|---|---|
| Model | 61K650P |
| Category | Lawn Mower |
| Language | English |
Information about the mower's construction and importance of following instructions for longevity.
Read manual and follow instructions; perform only described maintenance; contact dealer for major repairs.
Denotes a hazard that can result in injury or death if proper precautions are not taken.
Reminds of safety practices that could result in personal injury if proper precautions are not taken.
Denotes relevant information to assist in the performance of a task.
Warnings about operating the machine, including restrictions on children and adults without instruction.
Cautions regarding refueling, including waiting for the engine to cool and keeping fuel away from sparks.
Lists components included in the inner box for assembly.
Instructions for installing the battery, including special notes for units prior to SN 43276.
Guidelines for using clean, fresh, unleaded regular grade gasoline with minimum 87 octane.
Warning about the flammability and explosiveness of gasoline and precautions before refueling.
Guidelines for using clean, fresh diesel fuel with a minimum of 40 cetane.
Engines are shipped without oil; service engine and recheck oil level before starting.
Details oil capacities for different engine models and notes on multi-grade oil consumption.
Instructions for using a 50/50 mixture of antifreeze and tap water for the cooling system.
Steps for starting the engine, including lever positions, parking brake, and PTO engagement.
Steps for stopping the engine, involving idling and turning the key off.
Immediate actions for an emergency stop, including turning off the key and closing the fuel valve.
Instructions for testing the mower's operation, especially for new operators of zero-turn radius machines.
Explanation of the Safety Interlock System and its importance for safe operation.
Conditions that must be met before the engine can be started.
Situations that will cause the engine to automatically shut off.
Importance of correct tire pressure for drive and tracking; recommended front and drive tire pressures.
Procedure to adjust drive wheels to prevent creep when the control levers are in the neutral position.
How to adjust tracking if the machine pulls left or right, involving tire pressure and dampening cylinders.
Steps to check and adjust deck height for proper cutting levelness.
Instructions for adjusting the tension of the deck drive belt.
Safety precautions before performing maintenance, including engine off and spark plug disconnection.
Warning about the dangers of battery acid and the need for protective gear.
Warning against straightening or welding blades; importance of replacement and proper handling.
Guidelines for checking drive belts for alignment and wear after initial hours and periodically.
Periodic checking of tire air pressure for efficient operation, with listed pressures.
Instructions for checking and adjusting brakes after 40 hours of use and bi-weekly.
Daily servicing interval for mower blades, including stopping the engine and raising the deck.
How to check and add SAE 80W90 lubricant to the cutter deck gearbox.
Procedure for changing hydraulic oil, including frequency and when to change based on fluid condition.
Warning to allow hot fluids to cool before servicing transmission or engine systems to prevent burns.
A detailed list of grease points, quantities, and service intervals for lubrication.
A table outlining maintenance tasks and their recommended service intervals (daily, 8 hr, 25 hr, etc.).
Details the warranty period, coverage, exclusions, and requirements for claims.
To Next Page
