Encore E 9 - Page 16

E9 OP REV.A1
16
- Clock minutes
12:00AM
00 is flashing
, - Adjusts clock minute from 0 to 59
4 Alarm Clock
Menu
Default is
- Alarm hours 12:00AM
12 is flashing
, - Adjusts alarm clock hour from 0
to 12
- Alarm
minutes
12:00AM
00 is flashing
, - Adjusts alarm clock minute from
0 to 59
- Toggle alarm
ON + or
OFF
- Enable alarm clock or
- Disable alarm clock
5 Confirmation
Menu
VIBRTE
Default is
- Toggle BZ
VIB
+ or
VIBRTE + or
+ +
, - Buzzer or Vibration
6 Button Lock
Menu
Default is
- Toggle button
lock
- button lock / Disable the transmission
function temporarily
- button unlock / Enable the
transmission
Function.
7 Power Save
Menu
Default is
- Toggle power
save
- While the power save mode, the LCD
remote transceiver uses “0” current
to save the battery power.
- Power save OFF
Exit: Press any button of the LCD
remote transmitter to exit the
“Power Save Mode”.
8
Daily Start Timer
Setting
Daily Start Time Adjust Only (ex. 7:30AM)
- Daily Start
Hour
7:30AM
7 is flashing
, - Adjusts clock hour from 0 to 12
- Daily Start
Minute
7:30AM
30 is flashing
, - Adjusts clock minute from 0 to 59
To Exit: Do not push any buttons for 15 seconds