EasyManua.ls Logo

Encore ENDSL-A2+WIGX2 - Page 4

Encore ENDSL-A2+WIGX2
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web Based Management
‧ Web-based GUI Configuration / Management
‧ Command-line Interpreter (CLI)
‧ Telnet Remote Management
‧ Firmware upgrade via FTP / TFTP
‧ Support SNMP V.1 and V.2C
‧ Built-in Diagnostic tool and IP Ping
‧ TR-069, CPE WAN Management Protocol
Interface
‧ Four RJ45 ports compatible with IEEE 802.3/802.3u, 10/100Mbps auto
selection
‧ One RJ11 port for ADSL connection
‧ One power switch button
‧ One reset button for restoration of factory default setting
LED Indicators
‧ Power, LAN, ADSL, LANx4
Antenna
‧ One detachable Reverse SMA external antenna
Wireless Frequency
‧ 2.400~2.4835 Ghz
Receiver Security
‧ IEEE 802.11b: -84 dBm (typical), IEEE 802.11g: -60 dBm (Typical)
Transmit Output Power
‧ 11b : 19±1 dBm, 11g : 15±1 dBm
Power Adapter
‧ Power Adapter: Input 110
±
10 or 230
±
10 VAC, Output 12VDC 1000mA
Dimensions (approximate)
160 mm (Length) x 130 mm (Width) x 24 mm (Height)
Net Weight (approximate)
‧ 320g
Operating Temperature
‧ 0°C ~ 45°C
Humidity
‧ 5% ~ 95% (Non condensing)