EasyManuals Logo

Encore ENH916P-NWY User Manual

Encore ENH916P-NWY
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
2. Introduction
2.1 General Description
The device is a powerful, high-performance Fast Ethernet switch, with all 16
ports capable of 10 or 100Mbps auto-negotiation operation (NWay), which
means the switch could automatically negotiate with the connected partners on
the network speed and duplex mode. It is ideal for micro-segmenting large
networks into smaller, connected subnets for improved performance, enabling
the bandwidth demanding multimedia and imaging applications. Moreover, the
10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to
100Mbps networks with no pain. Compared to the shared 10Mbps or 100Mbps
networks, the switch delivers a dedicated 10/100Mbps connection to every
attached client with no bandwidth congestion issue.
Store-and-forward switching mode promises the low latency plus eliminates all
the network errors, including runt and CRC error packets. To work under
full-duplex mode, transmission and reception of the frames can occur
simultaneously without causing collisions as well as double the network
bandwidth.
The switch is plug-n-play without any software to configure and also fully
compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs
on the front-panel provide the operating status of individual port and whole
system.
The switch can use the following types of cabling:
10BASE-T Category 3, 4 or 5 UTP/STP
100BASE-TX Category 5 UTP/STP
Category 5 cable is preferred to use with this product in structured wiring
environments. This will ensure correct operation of all ports at 10Mbps or
100Mbps.

Other manuals for Encore ENH916P-NWY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Encore ENH916P-NWY and is the answer not in the manual?

Encore ENH916P-NWY Specifications

General IconGeneral
StandardIEEE802.3, 10BASE-T IEEE802.3u, 100BASE-TX IEEE802.3x Full Duplex operation and Flow Control
LED indicationsSystem Power Port Link/Activity
EmissionFCC Class A, CE, VCCI
Interface16 * RJ-45 NWay switching ports
Cable ConnectionsRJ-45 (10BASE-T) : Category 3, 4, 5 UTP/STP RJ-45 (100BASE-TX) : Category 5 UTP/STP
Network Data RateAuto-negotiation (10Mbps, 100Mbps)
Transmission ModeAuto-negotiation (Full-duplex, Half-duplex)
MAC Address Table8K MAC entries
Filtering/Forwarding Rate10Mbps: 14, 880pps/14, 880pps 100Mbps: 148, 800pps/148, 800pps
System Buffer Memory156K Bytes
Operating Temperature0 ~ 40 C (32 ~ 104 F) 0 0 0 0
Operating Humidity10% - 90%
Power SupplyExternal linear power adapter (12V/1A)

Related product manuals