Need help?Do you have a question about the Encore ENH916P-NWY and is the answer not in the manual?
General| Standard | IEEE802.3, 10BASE-T IEEE802.3u, 100BASE-TX IEEE802.3x Full Duplex operation and Flow Control |
|---|---|
| LED indications | System Power Port Link/Activity |
| Emission | FCC Class A, CE, VCCI |
| Interface | 16 * RJ-45 NWay switching ports |
| Cable Connections | RJ-45 (10BASE-T) : Category 3, 4, 5 UTP/STP RJ-45 (100BASE-TX) : Category 5 UTP/STP |
| Network Data Rate | Auto-negotiation (10Mbps, 100Mbps) |
| Transmission Mode | Auto-negotiation (Full-duplex, Half-duplex) |
| MAC Address Table | 8K MAC entries |
| Filtering/Forwarding Rate | 10Mbps: 14, 880pps/14, 880pps 100Mbps: 148, 800pps/148, 800pps |
| System Buffer Memory | 156K Bytes |
| Operating Temperature | 0 ~ 40 C (32 ~ 104 F) 0 0 0 0 |
| Operating Humidity | 10% - 90% |
| Power Supply | External linear power adapter (12V/1A) |
Overview of the 16-Port Fast Ethernet Switch, its features, capabilities, and operation modes.
Details the front panel layout, including LEDs and auto-negotiation modes.
Describes the rear panel of the switch and how to connect the power adapter.
Guides on desktop installation, cable connection, and placement for optimal setup.
To Next Page
