Encore ENH924-AUT Features

Features:
• Complies with 10BASE-T specifications of the IEEE802.3 standard
• Complies with 100BASE-TX specifications of the IEEE802.3u standard
• Twenty Four RJ-45 ports for 100Base-TX and 10Base-T connectivity
• Supports NWAY protocol for speed (10/100Mbps) and duplex mode
(Half/Full) auto-detection
• All Ports are Auto MDI/MDI-X auto crossover
• Supports full and half duplex operation on all ports
• Wire-speed packet filtering and forwarding rate
• Store-and-forward architecture filters fragment & CRC error packets
• Supports 4K MAC address entries in whole system
• 768 KB buffer memory
• Supports extensive LED indicators for network diagnostics
• Internal switching power adapter: 100-240VAC

Encore ENH924-AUT Specifications

Network Specifications

standard	IEEE802.3, 10BASE-T
interface	RJ-45 x 24 NWay switching ports
network data rate	Auto-negotiation (10Mbps, 100Mbps)
transmission mode	Auto-negotiation (Full-duplex, Half-duplex)
system buffer memory	768K byte
MAC address table	4K entries
filtering/forwarding rate	10Mbps: 14, 880pps/14, 880pps, 100Mbps: 148, 800pps/148, 800pps

Operating Environment

operating temperature	0°C ~ 50°C (32°F ~ 122°F)
operating humidity	10% - 90%
emission	FCC Class A, CE

Power

power supply	100~240VAC, 50~60Hz