ENH924-AUT
24-Port Fast Ethernet Switch
The ENCORE ENH924-AUT 24-Port Fast Ethernet Switch is a powerful, high-performance
Fast Ethernet switch, with all 24 ports capable of 10 or 100Mbps auto-negotiation operation
(NWay), which means the switch could automatically negotiate with the connected partners
on the network speed and duplex mode. It is ideal for micro-segmenting large networks into
smaller, connected subnets for improved performance, enabling the bandwidth demanding
multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability
provides an easy way to migrate 10Mbps to 100Mbps network with no pain. Compared to
the shared 10Mbps or 100Mbps networks, the switch delivers a dedicated 10/100Mbps
connection to every attached client with no bandwidth congestion issue. This switch also
supports auto MDI / MDI-X function. Each port could be used to connect to another switch or
hub with no crossover RJ-45 cable.
Store-and-forward switching mode promises the low latency plus eliminates all the network
errors, including runt and CRC error packets. To work under full-duplex mode, transmission
and reception of the frames can occur simultaneously without causing collisions as well as
double the network bandwidth.
To Next Page
Need help?
Network Specifications
Power
