HYDRO-DRIVE WALK BEHIND MOWER
25
RECOMMENDED MAINTENANCE SCHEDULE(S)
Maintenance Service Interval
Check the engine oil level
Check the mower blades
Check the safety interlock system
Check for loose hardware
Check for belt obstructions
Check for fuel and oil leakage
Clean the engine and exhaust system area
Clean the grass and debris build-up from the machine and
cutting deck, including under the deck
After the first 100 hours
Torque the wheel lug nuts
Clean the dust and dirt from cylinder and cylinder head fins
Clean the spark plugs, check and adjust gap if necessary
After the first 150 hours
Change hydraulic oil and filter
Check the condition of the belts
Check the tire pressures
Grease the caster wheel bearings
Grease the deck belt idler arm bearing
Change the engine oil filter
Replace the primary air cleaner
Grease cutter housing bearings
Check the secondary air cleaner – replace if dirty. See the
Engine manual for additional information
Torque the wheel lug nuts
Change hydraulic oil and filter
Replace the secondary air cleaner. See the Engine manual
for additional information.
Check the battery charge
Grease the front caster pivots