Should any trouble occur, remove the power source and refer servicing to qualified
personnel.
BATTERY INSTALLATION
The battery compartment is located on the back of the remote
control.
1. Remove the battery compartment door by pressing in on
the tab and lifting it off.
2. Insert two (2) AAA size batteries (not included) into the
battery compartment as the polarity markings inside the
battery compartment.
3. Replace the battery compartment door.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in
the battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc)
or old batteries with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a
long period of time, remove the battery to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat
and rupture. (Follow battery manufacturer’s directions.)
6. Do not dispose of batteries in fire or sunshine. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery
installation.
To Next Page
Loading...
Need help?
General