ENDEVCO 133 - 3.3 Ordering Information and Accessories

ENDEVCO www.endevco.com Tel: +1 (866) ENDEVCO [+1 (866) 363-3826]
IM133, Page
23
®
3.3 Ordering Information and Accessories
ENDEVCO
®
Model 133 must be specified in the following manner: 133-X
If no filter is specified at time of order entry, the standard default filter installed is a 10 kHz low pass
Butterworth.
If X is left blank, the standard 90-240 VAC Power is supplied. If X = 1, then the 9-18 VDC Power
is supplied.
Description
Endevco Part No.
Quantity Supplied
IEC 320 AC Power Cord
EW599
1
Instruction Manual
IM133
1
10-32 to BNC adapter
EJ21
0
Filter Module 4-pole Low Pass Filter Options
31875-XXXX-Y
0
Serial DB9F to RJ-11 Adapter
EJ807
0
7 ft. 6P4C Cable with RJ-11 Modular Plugs, Straight Pinning
EW1027
0
Rack Mounting Kit
31979
0
Auto Lighter to 760 Plug Cord Assembly (133-1 only)
EHM1409
1
12 VDC Power Supply, 26 Watts
EHM1413
0
Serial Communication Kit, Containing the following:
Software, three EJ822, one EJ807 and one EW1027.
32009
0
Modular Splitter Adapter M-F (6 x 4)
EJ822
0
Application Software
35933
0
Inline Coupler, RJ11 (6 x 4)
EJ847
0
Cable, 6P4C, Straight, w/RJ11 (2 ft.)
EW1077
0
WARNING! Use of RJ11 cable other than that specified herein will cause catastrophic failure of the unit