Quick Reference Guide EN 02_19 Biometra TRIO
Press [INCUBATE] to incubate the sample block at a constant temperature
Press [TOOLS] to access the system settings, user management, documentation,
backup tool or self-test functions
Press [LOGOUT] to log out
Important note: It depends on your rights settings if you are allowed to create, delete,
save, copy, start and stop programs. If you do not have a specific right you will not
have access to the corresponding tools. Please ask your administrator or check your
rights settings if you are missing a button or function.
Press [PROGRAMS] in the Biometra TRIO home screen. The program overview screen
opens:
To edit a program template press [NEW FROM TEMPLATE], select a template and press
[OPEN TEMPLATE].
To edit a stored program select a user directory, select a program and press [EDIT].
The Biometra TRIO programming screen opens. Use the following buttons to switch
between the different programming modes:
Spreadsheet programming screen
Graphical programming screen
Define the program name. Touch the input box “NAME” and enter a program name
using the Biometra TRIO keyboard.
Define the heated lid status and temperature. Touch the input box “LID” and switch
the heated lid on or off. If the heated lid is switched on enter a temperature be-
tween 30 °C and 110 °C.
To switch heated lid preheating mode on or off press the corresponding button.
Select a program step and press [EDIT]. The edit step screen opens:
Edit, save and copy pro-
grams
To Next Page
Loading...
