Quick Reference Guide EN 02_19 Biometra TRIO
To copy programs press the button [PROGRAMS] in the Biometra TRIO home screen.
To copy all programs located in a user directory select a user directory and press the
button [COPY ALL]. To copy a single program select a user directory and a program
and press the button [COPY]. Select a user directory, a storage place and press the
button [SAVE].
To delete all programs located in a user directory select a user directory, press the
button [DELETE ALL] and confirm the security query. To delete a single program se-
lect a user directory and a program and press the button [DELETE]. Confirm the se-
curity query to delete the selected program.
The Biometra TRIO thermal cycler stores the latest 5 edited or started programs for
each user. For quick start of a program press the [QUICK START] button in the home
screen. Select a program from the list and press [START].
To start a program from a user directory press the button [PROGRAMS] in the home
screen. In the next screen select a user directory and a program and press the
[Start] button.
After start the running program is shown in spreadsheet or graphical view. Use the
same buttons as for the programming screen to switch between the different
modes. The current step is highlighted in yellow.
To pause the active program press the button [PAUSE]. The color of the highlighted
step changes to blue and in the field “STEP” the message PAUSE is shown.
To continue a paused program press the button [CONTINUE].
To skip a step press the button [SKIP].
To stop the active program press the button [STOP PROGRAM] button and confirm
the security query. Note: Programs with a pause in the last step have to be stopped
manually as well.
In the home screen press [TOOLS], in the next screen the button [USER-
MANAGEMENT]. Then use the checkboxes to switch the user management on or off.
Start, pause and stop
programs
Switch user manage-
ment on or off (only
aministrator)
To Previous Page
Loading...
