Need help?Do you have a question about the Endress+Hauser Cerabar T PMP135 and is the answer not in the manual?
General| Pressure type | Absolute, gauge |
|---|---|
| Output signal | 4 to 20 mA |
| Power supply | 10.5...45 V DC |
| Accuracy | 0.5 % |
| Process connection | G 1/2, 1/2 NPT, Flange |
| Housing material | Stainless steel |
| Protection | IP66 |
| Electrical connection | M12 connector, cable gland |
| Measuring range | 0 to 100 mbar up to 0 to 400 bar |
To Next Page
