Endress+Hauser Field Xpert SMT50 - Charging the battery; Switching on the tablet PC; Connecting the AC adapter; Operation

Field Xpert SMT50 Operation
Endress+Hauser 19
7.2 Charging the battery
Due to transport safety regulations, the lithium ion battery is not fully charged when
purchased.
1. The battery must be inserted.
Connect the AC adapter to the DC socket of the tablet PC.
2. Connect the AC adapter to the power cable.
3. Connect the power cable to a power outlet.
7.3 Switching on the tablet PC
‣
Press and hold the button until the power LED is lit.
The tablet PC starts.
7.4 Connecting the AC adapter
The AC adapter powers the tablet PC and charges the battery.
When using the AC adapter:
Place the device sufficiently close to a power outlet that the power cable can still reach
the outlet.
Only operate the device with the type of power source indicated on the device nameplate.
Disconnect the AC adapter from the power outlet if the device will not be used for an
extended period.
1. Connect the AC adapter to the DC socket of the tablet PC.
2. Connect the AC adapter to the power cable.
3. Connect the power cable to a power outlet.
The tablet PC may only be used with the corresponding AC adapter.
If the tablet PC is connected to a socket and the battery is inserted, the tablet PC is
powered via the socket.
8 Operation
NOTICE
The use of unsuitable objects to operate the device
can damage the screen.
‣
Do not use pointed objects for the screen.