Endress+Hauser Field Xpert SMT50 - Information and software settings

Operation Field Xpert SMT50
28 Endress+Hauser
3. Enter the password and click Connect.
 The connection window opens.
4. Do not change the IP address - leave it as is.
5. Click the icon.
6. Click Vendor specific.
7. The DeviceDTM opens and the device can be configured.
The initial password corresponds to the serial number of the device.
Tap Click here to connect to establish the connection directly via an IP address.
8.3 Information and software settings
‣
Click the
icon in the main menu.
 An overview of all the information and settings opens.
8.3.1 DTM catalog
‣
Click the DTM catalog tab.
 An overview of all the DTMs available opens.
Device driver offline view
‣
Double-click the desired device driver.