Endress+Hauser FXA291 - Operation; Overview of Operating Options

ToF Adapter FXA291 Operation
Endress+Hauser 11
5Operation
5.1 Overview of operating options
5.1.1 Local operation
A0023050
1 ToF device (e.g. Micropilot M)
2 ToF Adapter FXA291
3 Commubox FXA291
4 USB connection
Operation is performed using a Personal Computer, a Commubox FXA291 with ToF
Adapter FXA291 (USB) and the operating software "FieldCare". FieldCare is a graphical
operating program for measuring devices from Endress+Hauser. It assists with
commissioning, data back-up, signal analysis and documentation of the measuring
point.
5.1.2 Operation with FieldCare
FieldCare is Endress+Hauser's plant asset management tool based on FDT technology.
With FieldCare, you can configure all Endress+Hauser devices as well as devices from
other manufacturers that support the FDT standard. Hardware and software
requirements can be found on the Internet:
www.de.endress.com ▸ Search: FieldCare ▸ FieldCare ▸ Technical data.
1
2
3
4