ToF Adapter FXA291 Commissioning
Endress+Hauser 13
6 Commissioning
If using the ToF Adapter FXA291 with FDT/DTM software (e.g. FieldCare), the
special IPC devices DTMs (according to the communication protocol) and „Level
Pressure FXA193 CommDTM“ must be used. The DTMs are supplied on the
FieldCare-CD-ROM.
7 Maintenance and repair
7.1 Cleaning
When cleaning the device externally, ensure that the cleaning agent used does not
attack the housing surface and seals.
7.2 Repair
The Endress+Hauser repair concept does not envisage any repairs:
For further information, please contact Endress+Hauser Service.
7.3 Return
The device may be returned in the event of an incorrect delivery or order. As an
ISO-certified company, Endress+Hauser is required by law to follow certain procedures
when handling returned products that are in contact with the medium.
To ensure that your device is returned swiftly, safely and in a professional manner,
please read the procedures and conditions on the Endress+Hauser website at
www.services.endress.com/return-material
7.4 Disposal
When disposing of the device, the device components must be separated and recycled
based on the materials involved.
7.5 Contact addresses for Endress+Hauser
Contact addresses can be found on our homepage: www.endress.com/worldwide.
If you have any questions, please contact your Endress+Hauser subsidiary.
To Next Page
Loading...
