Need help?Do you have a question about the Enduro autoSteady AS101 and is the answer not in the manual?
General| Brand | Enduro |
|---|---|
| Model | autoSteady AS101 |
| Category | Automobile Accessories |
| Language | English |
Specifies the suitability and limitations of the autoSteady system for caravans.
Lists the technical details and operating parameters of the autoSteady system.
Outlines crucial safety precautions to follow before and during installation.
Highlights critical safety warnings and precautions for installation.
Step-by-step guide to remove the existing manual corner steady.
Instructions for attaching the motorized spindle to the caravan chassis.
Details on fixing the 19mm hex head to the spindle using a pin.
Procedure for installing the electronic control unit and connecting motor/battery cables.
Explains how to connect motor cables using number markers to the control unit.
Steps to install the battery isolation switch for safe power management.
Crucial safety rules to follow during autoSteady system operation.
Guidelines for storing the remote and securing the handbrake during use.
Detailed explanation of buttons and their functions on the remote handset.
How to use the 'AUTO UP' and 'AUTO DOWN' buttons for full system operation.
Instructions for replacing the 9V battery in the remote control handset.
Procedure to re-synchronize the remote handset with the control unit.
Explains the meaning of LEDs on the control unit and common error indications.
How to reset the electronic control unit and its synchronization process.
Steps to follow before operating the autoSteady system for the first time.
How to use the automatic down function for corner steadies.
How to use the automatic up function for corner steadies.
How to adjust individual corner steadies for fine-tuning.
Steps for manually retracting corner steadies when automatic function fails.
How to activate the emergency draw back function.
Guidance on routine inspections and lubrication for system longevity.
Troubleshooting steps for when the system does not function at all.
Solutions for problems causing the system to operate intermittently.
Diagnosing and resolving issues related to remote control communication.
Addressing situations where the motor rotates freely but the spindle does not turn.
To Next Page
