EasyManua.ls Logo

Enduro BC101 - Safety Guidelines; Specifications

Enduro BC101
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENDURO
®
BC101 22
Ref: BC101-UM-TKI-0417-Rev.A.
SPECIFICATIONS
Designation ENDURO
®
BC101
Operational voltage 3,3 Volt DC
Communication Bluetooth
Android operating system requirement Version 4.3 and above
iOS operating system requirement Version 7.0 and above
SAFETY GUIDELINES
Read this user manual carefully before installation and use.
Failure to comply with these rules could result in serious
injury or damage to property.
Make sure that the smartphone or tablet system software is conform
the minimum requirements as specified at the specifications.
Make sure that the smartphone or tablet system software is up to
date.
Make sure that the smartphone or tablet is without any damage.
Damaged screens or units can have a big influence on the function
of the remote handset APP. No warranty claim will be accepted and
we cannot guarantee the function of the system if the smartphone
or tablet is damaged. We will not be liable for any damage
whatsoever caused as a result of using the remote handset APP on a
damaged smartphone or tablet.
Only use accessories that are supplied or recommended by the
manufacturer.
Stop work immediately if you are in doubt about the assembly or
any procedures and consult one of our engineers (Please refer to
contact information on the last page of this manual).
Do not use or install the adapter if you are under the influence of
drugs, alcohol or medication that could impair your ability to use the
equipment safely.
Practice operating the manoeuvring system or autoSteady system
in an open area before using for the first time. This is to fully
familiarise yourself with the remote handset APP / handset /
manoeuvring system or autoSteady operation.
Before use, always check smartphone or tablet for any damage.