To Next Page
M
Mr. Robert Salinas PhDJul 29, 2025
What to do if my Enercell Inverter shuts down?
- JJessica ShortJul 29, 2025
The Enercell Inverter might shut down due to several reasons. First, the device plugged into the inverter might be faulty, so try using another device to check. Second, the inverter could overheat if the temperature exceeds 158°F (70°C); in this case, disconnect the device and allow the inverter to cool down. Note that your device’s power requirement might exceed the inverter’s rating. Finally, the vehicle battery voltage might be too low (less than 10V); in that case, run the vehicle’s engine to recharge the battery, then turn the inverter’s power switch off and on.
General
