EGM-PWM-LAN ENERGY METER WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
4. The web server
Your EGM-PWM-LAN is equipped with a web-server which allows
managing the device using any web browser such as Internet Explorer
etc.
4.1. Web-server login page
To access the web server of EGM-PWM-LAN, just open Internet
Explorer (or other browser) and input the IP address of EGM-PWM-LAN
(for example http://192.168.1.241). If you have used LAN Find utility to
locate EGM-PWM-LAN then you will be taken to this webpage
automatically. Login page will then be displayed (see Figure #5 below).
NOTE: Java script must be enabled in your Internet Explorer (or
another browser) settings. Otherwise, you get an error message:
WARNING! JAVASCRIPT IS DISABLED!
Figure #5
The default password is 1. It is recommended to change the
password on the Device settings page (see section 4.3 below) after the
first login.
To Next Page
Loading...
Need help?
General
